53Ʊ

What are the production permits for prestressed concrete sleepers?

The pre-stressed concrete pillow product production license is issued according to the "People's Republic of China Industrial Product Production License Management Regulations" (State Council Order No. 440), "People's Republic of China Industrial Product Production License Management Regulations Implementation Measures" (National Order of the General Administration of Inspection and Quarantine No. 80), "The State Administration of Quality Supervision, Inspection and Quarantine
Decisions on the Implementation Measures of the Production License Management Regulations "(Order of the General Administration of Quality Supervision, Inspection and Quarantine No. 130), etc., formulated these detailed rules for implementation.
1.2 The prestressed concrete sleeper products specified in these detailed rules are divided into 1 product unit and 2 specifications (see Table 1).
Table 1 Pre-stressed concrete pillow product units and specifications
No. Product unit Specification
1 Type II prestressed concrete pillow
New type II YII-F type
An application for a production license for a prestressed concrete pillow product manufacturing enterprise shall meet the following conditions:
3.1 Have a business license, and the business scope covers the declared products;
3.2 There are professional and technical personnel suitable for the products produced (see Annex 2);
3.3 There are production conditions and inspection methods suitable for the products produced (see 5.2, Annex 2);
3.4 There are technical documents and process documents suitable for the products produced (see Annex 2);
3.5 Have a sound and effective quality management system and responsibility system (see Annex 2);
3.6 The product complies with relevant national standards, industry standards, and requirements to protect human health and the safety of people and property (see 5.1, Annex 2);
3.7 In line with the provisions of the national industrial policy, there are no such cases as backward technology, high energy consumption, environmental pollution, and waste of resources that are explicitly eliminated or prohibited by the state. Where there are other provisions in laws and administrative regulations, they shall also comply with them.
4 Pre-stressed concrete pillow product production license permit procedure
4.1 Application and processing
4.1.1 When applying for a production license, an enterprise shall submit the following application materials to the provincial quality and technical supervision bureau where it is located:
4.1.1.1 Application for National Industrial Product Production License. "Products in the National Industrial Product Production License Application"
Fill in the pre-stressed concrete sleepers in the Category column, fill in the pre-stressed concrete sleepers in the Product name column, and press the Product unit column.
Fill in the product unit column of Table 1, and fill in the "Product Variety, Specification Model" column according to the specification model column of Table 1.
If a group company and its affiliated company apply for a production license together, the group company and its affiliated company shall submit a completed and completed Application Form for National Industrial Product Production License.
4.1.1.2 Copy of business license.
4.1.1.3 Photocopy of production license (applicable to enterprises that re-apply after the expiry of the production license).
4.1.1.4 Certificate of environmental protection compliance, environmental protection acceptance of construction project completion, or permit to discharge pollutants.
The above materials are in triplicate, one for each provincial quality and technical supervision bureau, examination department and national license examination center.
Stamped with the official seal of the company.
4.1.2 After receiving the enterprise application, the provincial-level Bureau of Quality and Technical Supervision shall accept the application materials that meet the requirements of the detailed implementation rules.
And send the "Administrative License Application Acceptance Decision" to the enterprise within 5 days from the date of receiving the enterprise application;
If the application materials do not meet the requirements of the present detailed rules and can be fulfilled through amendments, they shall send a one-time notification to the enterprise on the spot or within 5 days by sending the "Notice of Correction of Administrative License Application Materials. If you do not notify within the time limit, the application will be accepted from the date of receipt of the application materials;
If the application materials do not meet the requirements of the "Administrative Licensing Law of the People's Republic of China" and the "Regulations on the Administration of Production Licenses of Industrial Products of the People's Republic of China", a decision shall be made to reject the application, and an "Decision to Accept the Application for Administrative License" shall be issued.
4.1.3 The provincial license office for the production license of prestressed concrete pillow products shall submit the application materials to the examination department within 5 days from the date of receiving the application from the enterprise.
4.1.4 From the date when the provincial-level quality and technical supervision bureau makes a decision on the acceptance of a production license, an enterprise may trial-produce the product for which the certification is applied.
Products trial-produced by an enterprise must be approved by the inspection agency that undertakes the inspection task of the production license product according to the provisions of this implementation rule (each batch should be the same type of pillow made of the same shift and made of the same materials and technology) and pass the inspection. The product or packaging and certificate of conformity shall be marked as "prototype" before sale. In the case of a decision not to approve the General Administration of Quality Supervision, Inspection and Quarantine, the enterprise shall not continue to trial-produce the product from the date of the decision.